Park in Lot D unless otherwise instructed, Gate 5 is across the street from Lot D, on the bay side of the venue. Please allow time for traffic and parking. Tell the Parking and Check In Security that you are a IATSE 134 Stage Hand. Bag check and metal detection will be performed at the Gate 5 entrance.
Work Cloths for Set up and Strike. Show Blacks for Deck Call
All clothes should be clean, no tears or stains; shirts should be buttoned up, pants pulled up; no open toed shoes.
Work Clothes: Jeans or other work pants; shorts or sleeveless shirts may not be acceptable in certain circumstances.
Show Blacks: Same as work clothes but black; jeans or cargo pants, small logos are acceptable.
Tech Blacks: Collared shirt (polo or button up), small logos may be acceptable; unfaded black jeans or Dockers; black shoes or sneakers.
Dress Blacks: Button up black shirt, no logos; black dockers or dress slacks, polishable shoes.
Hard hats: Ansi Z89.1 compliant. Chin straps required for all climbers
High Vis: Class 2 or 3
From the Outline of Workers Obligations
A WORKER AT THE JOB SITE SHALL HAVE THE REQUIRED TOOLS
A Basic Hand Tools required:
Hammer, 8” Adjustable Wrench, Slotted & Phillips Screwdriver, Pliers, Wire Cutters, Knife, and Gloves, Pen or Pencil and Flashlight.
Other specific tools may be required for other specifically assigned work (i.e., riggers, A/V techs, etc.) If this is the case, the appropriate steward will notify you.
Steel toe safety shoes and safety glasses (if you normally wear glasses are strongly recommended and are the responsibility of the worker.
Recommended Tools include:
Tool Belt or Pouch, Battery Powered Screwdriver/Drill, Measuring Tape, Socket, Open End, Box End and/or Ratchet Wrenches.
Failure to have the required tools may result in your replacement on the call.
4 in 1 Screwdriver
Full Body Harness ANSI Z359
Y Lanyard ANSI Z359
75’ Rope 5/8” Single or Double Braid